16:xx.xx for HP Latex 310,315,330,335,360,365 and 560 Designjet Printer
System Error Code: 16.01:00 – Curing System unable to warm up in the pre-defined amount of time
System Error Code: 16.02:00 – Curing system: cool down timeout
System Error Code: 16.03:00 – Curing system: high temperature error
System Error Code: 16.04:00 – Curing system: low temperature error
System Error Code: 16.05:00 – Curing system: temperature sensor error
System Error Code: 16.07:03 – Curing system: warm up timeout (uniformity)
System Error Code: 16.11:10 – Curing System: Temperature sensor 1 failure or not connected
System Error Code: 16.12:10 – Curing System: Temperature sensor 2 failure or not connected
System Error Code: 16.13:10 – Curing System: Temperature sensor 3 failure or not connected
System Error Code: 16.14:10 – Curing System: Temperature sensor 4 failure or not connected
System Error Code: 16.31:10 – Curing system: Fan 1 fault
System Error Code: 16.32:10 – Curing system: Fan 2 fault
System Error Code: 16.33:10 – Curing system: Fan 3 fault
System Error Code: 16.34:10 – Curing system: Fan 4 fault
System Error Code: 16.39:10 – Curing system: More than 1 fan failure
System Error Code: 16.41:10 – Curing system: module 1 failure
System Error Code: 16.42:10 – Curing system: module 2 failure
System Error Code: 16.43:10 – Curing system: module 3 failure
System Error Code: 16.44:10 – Curing system: module 4 failure
System Error Code: 16.50:03 – Curing system: pressure calibration error
System Error Code: 16.50:10 – Severe SE: Pressure calibration failure together with NVM values = 0 (failure at first startup)
System Error Code: 16.51:01 – Curing system: pressure not reachable. Printer is limiting working pressure
System Error Code: 16.61:10 – Vapor removal system: vapor fans array 1 fault
System Error Code: 16.70:10 – Air Curtain system: Box fan fault or disconnected
System Error Code: 16.71:10 – Air Curtain system: Board box fan or cable damaged
System Error Code: 16.82:11 – Air Curtain steady resistor: Not connected
System Error Code: 16.83:11 – Vapor burst resistor: Not connected
System Error Code: 16.84:03 – Air Curtain steady resistor: Out of range
System Error Code: 16.85:03 – Air Curtain burst resistor: Out of range
System Error Code: 16.90:10 – Air Curtain: Temperature sensor failure or not conected